45280-26100
KINGMAY
45280-26100
BMW
3 Series
2026
Engine System
Ignition Coil
| Quantity: | |
|---|---|
Product Description
This OEM-matching transmission oil pan, also known as a transmission oil sump or ATF reservoir, is a core component installed at the bottom of automatic transmission housings. It is designed for 6-speed automatic transmission systems used in Hyundai and Kia vehicles, manufactured with PA66+GF35 engineering plastic to align with original equipment specifications. The housing features engraved brand identifiers, and the OEM part number 45280-26100 is marked on the inner surface for accurate part identification. Its primary functions include storing automatic transmission fluid, sealing the lower section of the transmission housing, and trapping metal wear debris generated during component operation.
Parameter | Details |
OEM Part Number | 45280-26100 |
Material | PA66+GF35 (PA66 nylon base with 35% glass fiber reinforcement) |
System | Transmission System |
Part Type | Transmission Oil Pan |
Quantity per Package | 1 unit |
Stock Status | 100 units available |
A ring of evenly spaced bolt holes is distributed along the outer edge of the pan housing. When the oil pan is fastened to the lower transmission housing, these holes apply uniform compression to the sealing gasket, reducing the risk of transmission fluid leakage during regular vehicle operation.
Grid-shaped protruding ribs are integrated into the inner surface of the housing. This structural design enhances the rigidity of the plastic shell, minimizing deformation caused by fluctuating transmission fluid impact during gear shifts and continuous engine operation.
A circular drain plug is located at the lower right corner of the housing. This plug provides a dedicated access point for draining automatic transmission fluid during routine maintenance, eliminating the need to remove the entire oil pan assembly for standard fluid change procedures.
The inner housing includes raised platforms of varying heights. These structures create reserved space to accommodate the built-in transmission oil filter and valve body assembly, while also allowing transmission fluid to settle and capture metal debris produced by internal component wear.
This transmission oil pan is compatible with a range of Hyundai and Kia models equipped with 6AT transmission systems. Compatible Hyundai models include Elantra, Langdong, Mistra, iX25, iX35 and Tucson. Compatible Kia models include K3, K4, K5, Sportage, Forte and Soul.
Compared with traditional iron transmission oil pans, this PA66+GF35 plastic variant has a lower overall weight, which contributes to reduced vehicle fuel consumption. It also provides improved vibration and noise damping properties during transmission operation. Plastic housings carry a higher risk of cracking and fluid leakage if impacted by road debris. Unlike iron oil pans, damaged plastic transmission oil pans cannot be repaired through sheet metal work and require full assembly replacement.
For businesses engaged in automotive repair, parts distribution and fleet operations, this OEM-aligned transmission oil pan delivers replacement performance consistent with original factory specifications. Its precise fit reduces installation time and the likelihood of post-repair leaks, lowering return visit rates and associated labor costs for service providers. Consistent material composition and structural design ensure uniform performance across all units, simplifying inventory management and quality control processes for commercial users. Customized production is available for orders that meet the specified minimum order quantity.
It is constructed from PA66+GF35 engineering plastic, which consists of a PA66 nylon base reinforced with 35% glass fiber.
Yes, this part is compatible with Hyundai Tucson vehicles equipped with 6-speed automatic transmissions.
No, cracked plastic transmission oil pans cannot be effectively repaired and must be replaced with a new assembly.
This listing includes only the transmission oil pan assembly. Sealing gaskets and oil filters are sold separately.
Customized production is supported for order quantities ranging from 500 to 1000 units.
With 100 units currently in stock, standard orders for this transmission oil pan can be processed and shipped within regular lead times. For bulk procurement inquiries or additional compatibility verification, please contact our sales team for detailed support.
